Roofing System

Reinforced Hybrid Roof System

A fully-reinforced liquid membrane assembly that embeds full-coverage reinforcement across the field for added strength on high-movement or demanding roofs.

ConcreteMetalAsphalt / BURCementitious boards
Request specification Submit a Project
When this system may fit

Is this the right assembly?

  • The roof experiences significant movement or stress
  • A robust, fully-reinforced membrane is specified
  • Complex geometry benefits from consistent film build
  • Long-term durability is prioritized over lowest cost

These are indicators, not a specification. Suitability is confirmed by a project review.

Substrates

ConcreteMetalAsphalt / BURCementitious boards

Product families

System at a glance

The assembly, layer by layer

Finish / top coat
Weather and UV protection
Membrane (second pass)
Encapsulates the reinforcement
Full-coverage reinforcement
Embedded across the field
Membrane (base pass) + primer
Bonds to the prepared deck
Prepared substrate
Clean, sound and dry

Layers shown top (finish) to bottom (substrate). Actual products and build are per specification.

Existing condition

What we assess first

  • Movement and stress in the assembly
  • Deck soundness and moisture
  • Existing coatings and compatibility
  • Detailing complexity
Preparation requirements
  • Clean and repair the substrate
  • Confirm adhesion by testing
  • Prime to match the substrate
  • Plan reinforcement layout and overlaps
Critical details
  • Reinforcement overlaps and terminations
  • Penetrations and curbs
  • Movement joints
  • Edge and drain details
Application sequence

How it goes together

Prepare & prime

Clean, repair and prime the deck.

Base membrane

Apply the base pass to receive reinforcement.

Embed reinforcement

Lay and fully wet-out the reinforcement across the field.

Encapsulate & finish

Apply the second pass and finish coat.

Approved system build. The specific products, film builds, coverage rates, cure and recoat times and the qualified build-up for the Reinforced Hybrid Roof System are confirmed by the current specification and a project review. We publish these values only where supported by the approved product documents — request the specification for your project below.
Performance

What it delivers

  • High tensile strength and crack-bridging
  • Consistent, monitored film build
  • Robust on high-movement assemblies
Limitations & considerations

Where to take care

  • More labour-intensive than unreinforced coatings
  • Weather-dependent application
  • Requires careful reinforcement detailing
Weather & cure conditions
  • Apply within the specified temperature and humidity
  • Protect from rain until cured
  • Observe recoat windows
Quality-control checklist
  • Reinforcement fully wetted out with no voids
  • Overlaps and terminations inspected
  • Film build verified
  • Final continuity inspection
Warranty & qualification

Backed when specified & installed correctly

Warranty coverage for this system depends on specifying it appropriately for the conditions, installation by a qualified installer, and a registered project. Coverage terms are defined by the applicable warranty document.

Warranty Installer Certification

Technical documents

The specification, installation guide and detail drawings for the Reinforced Hybrid Roof System are maintained with revision control and available on request.

Request specification Specifications library

Evaluate this system for your project

Share your substrate and conditions for a confirmed recommendation.

Fast Project ReviewQuick turnaround on every request.
Expert RecommendationsThe right system for your conditions.
Dedicated SupportFrom selection to installation.
Submit a Project
Submit a Project